Ask Experts Questions for FREE Help !
Ask
    Captain Jack 01's Avatar
    Captain Jack 01 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 4, 2013, 12:55 PM
    How do I rewire an contact block for a air handler.
    I have a contact block that I replace.Some other people worked on it before I did.When I push the button in on the contact the unit will start working.So I am thinking that the wireing was but back on wrong.What can I do I don't want it to run 24/7.

Check out some similar questions!

Air Handler Blowing Warm Air/Outside Unit Humming Only [ 7 Answers ]

We came home yesterday to a 90 degree house. It was 95 degrees here yesterday and my husband left the setting at 72 degrees all day. I'm not sure if this had anything to do with the problem, but we thought it may have frozen/overheated the Carrier system (approx. five years old) during the heat...

I think my air handler drip line is clogged & I do not have compressed air. [ 3 Answers ]

This is a follow up on my other air handler question. I do not have compressed air to blow out the drain line. Is there anything else I can personally do besides call the a/c company.

Air handler won't run, just an unusual hum from the air handler. [ 0 Answers ]

My sister in law tried to install a new thermostat and has somehow messed something up. I went over and her Trane air handler will not run. I found that the glass bus fuse beside the transformer was blown. I replaced the fuse and I still get nothing except the hum from the transformer. I...

Rewire 110v air conditioner to 220v [ 4 Answers ]

I have a GE12k BTU air conditioner using 110v, and I have a prewired 220v air conditioner outlet available. So how can I rewire my air conditioner to use my 220v outlet?

Air handler works fine but compressor will not shut off. Air is cold. [ 1 Answers ]

I noticed the floor was very cold at the airhandler closet. A coils are clean in airhandler and I replaced the filter.My outside compressor just keeps running without stopping.Airhandler seems to be cycling on and off like it should.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.