Ask Experts Questions for FREE Help !
Ask
    rehanna86's Avatar
    rehanna86 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2006, 03:49 PM
    Honeywell thermostat model #t8411r
    Our system controls both the central air and heat in our home (which is a rental). Yesteday I noticed that after I had switched on the heat that the thermostat was no longer working. We have checked all the breakers and examined the circuit board, however, I am still in a quandry if this is a battery issue or if I should just call the rental management office back and have them send their professional ttech. Team over. The house is single family and only 4 years old and the a/c worked fine all summer. Any insight?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 20, 2006, 03:51 PM
    I would try changing the batteries
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell thermostat [ 11 Answers ]

I installed a Honeywell CT87A 4447 thermostat this summer. It worked fine with my air conditioning, but I am having a problem with it controlling my furnace. It will turn the furnace on and I can turn the fan on manually, but when set to auto the fan does not come on. The thermostat has the...

Honeywell T8411R Thermostat Wiring [ 3 Answers ]

Someone gave me this digital thermostat which was used & has no instruction papers. I have a Goodman Heating & A/C self contained unit outside for a mobile home. The old thermostat was a 4 wire system with a green wire on the G terminal, red wire on the RC terminal, blue wire on the Y terminal, and...

Honeywell Rth7000 Thermostat [ 5 Answers ]

I just bought a honeywell rth7000 thermostat, i am installing in a old house that only uses 2 wires, one is green and the other brown, can anyone advise me how to connect these 2 wires to this unit i am not sure exactly where to connect them to on the honeywell thermostat--thanks

Honeywell rth230b thermostat [ 3 Answers ]

We hooked up the honeywell programmable thermostat and it was working fine for 10 days or so until this weekend when the temperature should be at 67 all day from 6am to 10pm and 62 from 10pm until 6am on sat and sun. this weekend the thermostat does not bring the temp up to 67 but it leaves it at...

Honeywell RTH230B Thermostat [ 1 Answers ]

I recently installed Honeywell #RTH230B thermostat to replace and old Honeywell # T87F( old round non digitital type). I have oil burner with basebaord water heat. Since my olf thermostat was 2 wire only and I have no AC I pulled the jumper wire between Rh and Rc as per the instructions. Thj9is...

View more questions Search