Ask Experts Questions for FREE Help !
Ask
    startover22's Avatar
    startover22 Posts: 2,758, Reputation: 363
    Ultra Member
    		  
    #1

    Jul 5, 2007, 06:44 PM
    Honeywell system A/C not working?
    Holy Crap it is 82 degrees in the house. I have tried many different settings, read the dang manual can't find out how to get the a/c to come on. Should it be on Auto or should I have it on fan? What temp to set it to? I just tried to look through the frequently asked questions but it didn't direct me to where I needed to go. Please help, someone is going to find a big crusty dried up Startover22 on the floor in the morning if you don't. J/K! Thanks for any help at all!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 5, 2007, 07:02 PM
    Set to Auto, Set thermostat to 75 for test. Verify Breakers in Electrical Panel, and at disconnects are not tripped, turn off and back on, if you don't have a meter.
    Also, make sure it is set to cool.
    startover22's Avatar
    startover22 Posts: 2,758, Reputation: 363
    Ultra Member
    		  
    #3

    Jul 5, 2007, 07:09 PM
    Thanks, I am trying the settings right now... I will see if it comes on!
    paulbg2000's Avatar
    paulbg2000 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jul 6, 2007, 10:35 AM
    Quote Originally Posted by startover22
    Holy Crap it is 82 degrees in the house. I have tried many different settings, read the dang manual can't find out how to get the a/c to come on. Should it be on Auto or should I have it on fan? what temp to set it to? I just tried to look through the frequently asked questions but it didn't direct me to where I needed to go. Please help, someone is gonna find a big crusty dried up Startover22 on the floor in the morning if you don't. J/K! Thanks for any help at all!!
    I have a Honeywell Thermostat...

    I set the Fan to the On Position
    Flip the other switch to Cool
    After flipping switch to cool I press the down button to get to the desired temp then press Hold Temp.

    This starts the A/C running...
    startover22's Avatar
    startover22 Posts: 2,758, Reputation: 363
    Ultra Member
    		  
    #5

    Jul 6, 2007, 10:39 AM
    I don't know if it will work but I will try. How long does it take to start feeling the cool? I feel a little air comingout of all of the vents but nothing to really cool anything down. Upstairs it has to be about 110 degrees in the midday! I just went and changed it. I hope it works! Thanks.
    startover22's Avatar
    startover22 Posts: 2,758, Reputation: 363
    Ultra Member
    		  
    #6

    Jul 6, 2007, 01:58 PM
    I tried this, The temp is still going up, it ahs been a couple hours since I did it and the temp was right where we wanted it this morning when I started this. Arg... Help me...
    honeygirlhelp's Avatar
    honeygirlhelp Posts: 1, Reputation: 1
    New Member
    		  
    #7

    Jul 3, 2012, 09:18 PM
    Having same problem. Downstairs AC works, upstairs doesn't. We have two zones - because obviously the downstairs AC won't cool both downstairs and up - the space is too large. For some reason, upstairs cooling won't work consistently.

    HELP.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #8

    Jul 4, 2012, 05:49 AM
    Upstairs zone may be closed?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell programmable thermostat not working [ 1 Answers ]

Honey programmable thermostat not working on "AUTO" position. Air conditioning will come on with "ON" switch, however, when on "AUTO" thermostat shows all functions in display but I can't adjust temp or change settings at all or get display to go away. The power did go out for a few minutes...

Program honeywell RTH230B cooling system [ 1 Answers ]

I am having problems trying to program my cooling system to come on now. I tried with the programming of time, but that did not start the unit to come on. Thanks

Honeywell HE360 Humidifier Is Not Working [ 3 Answers ]

I recently installed two Honeywell HE360 humidifiers. One above each furnace in a dual zone system. Everything seems to be working like it should, but the humidity in the house isn't going up. The units are installed on the discharge of each furnace, and are piped to cold water. The water...

Carrier or Honeywell Zone System? [ 2 Answers ]

Hey all! I have a 2700sqft home that is two stories half of that is upstairs and half down. I have a 4 year old 5 ton all in one AC/Heat unit and only one return in the house which is downstairs. I have been getting estimates on getting a second return put in upstairs along with a zone system...

Honeywell RTH230B A/C Fan Not Working [ 3 Answers ]

I've read numerous threads on this model but could not find a solution. I just replaced my old thermostat with this model. The wiring on the old thermostat went as follows: Red - Rc jumped to Rh White - W Green - G Yellow - Y When I removed the old thermostat I noticed there was a blue...

View more questions Search