Honeywell sv9500m-2674

Nolan Burke Posts: 1, Reputation: 1

New Member

Feb 9, 2010, 02:58 PM

Honeywell sv9500m-2674

I have the problem with the square 4 plug that mount on the side of the gas valve. The blower motor will start and waiting for the burner to start. Then I would touch or move the wires and it will start the burner. It appears that this plug is not making a good connection. I was seaching on this type of gas valve (Honeywell SmartValve) and seem to be a problem with the connection. I was wondering if there are replacement kits to replace both the female and male end plug?

Check out some similar questions!

Wiring for Honeywell RTH7600D, old system was Honeywell T841A1217 [ 2 Answers ]

I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Install Honeywell RTH230B, Removing Honeywell Q674L [ 2 Answers ]

I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...

Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS [ 4 Answers ]

Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

View more questions Search

Check out some similar questions!

Add your answer here.