Check out some similar questions!
Diagram for honeywell RTH2300 wiring module
[ 3 Answers ]
I am trying to connect the wire to the themostat but the wire has 1 thick copper wire and doesn't have many wire colors to hook up to themostats. Our landlord left without finishing the set up on our wall heater(gas) and expected us to do it ourseleves. I am having trouble finding a module diagram...
Honeywell rth2300
[ 1 Answers ]
I have a Goodman ac/heat system. I recently installed a new Honeywell RTH2300 thermostat. Now, for some odd reason, the thermostat will not control the temperature correctly. If the heat is set t0 come on at 72 degree, the thermostat will not tell the heat to kick on until the temperature in the...
Installing new Honeywell rth2300 thermostat
[ 2 Answers ]
I just replaced an old digital thermostat with a new programmable honeywell. The wires coming out of the wall are as follows: Red White Blue Green In the old thermostat they were connected as follows: Red:Rh (jumpered to RC) White:W Blue:Y
Programmable Thermostat, Fan runs, Heat/Air do not run in Auto setting
[ 10 Answers ]
I am installing a Honeywell, RTH230B. My connections are: R to Rh (red jumper to Rc that came with the unit) W to W Y to Y G to G B to nothing The fan comes on (when set to "on").
Honeywell RTH230B A/C Auto Fan not working
[ 1 Answers ]
Hello, We installed the Honeywell RTH230B thermostat this January and it worked fine with our gas furnace. The problem is when we switched the control to cool yesterday the compressor turns on but the fan won't work in auto mode. It does work if I turn it to on mode only. Any ideas why the auto... View more questions Search
Add your answer here.
|