Ask Experts Questions for FREE Help !
Ask
    fiveft2sue's Avatar
    fiveft2sue Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 24, 2007, 09:52 AM
    Honeywell Chronotherm IV plus?
    How do I reset the filter reset button for Honeywell Chronotherm IV plus?
    J_paul1980's Avatar
    J_paul1980 Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Aug 24, 2007, 10:10 AM
    Hope this helps...

    1. Reset the timer by pressing the I key until the
    Expired timer is displayed.
    2. Press the Timer ▲ key to reset the timer.
    3. Press the Run Program key.
    Note: You can view the number of days remaining at
    Any time by pressing the I key three or four
    Times. If more than one timer is active, all active
    Timers show sequentially when pressing the I
    Key several times.

    If this doesn't work you can always call 1-800-468-
    1502
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Filter reset button for Honeywell Chronotherm IV plus [ 13 Answers ]

I just changed the filter in my furnace, how do I reset my thermostat to make the word "filter" stop blinking. I called the service dept. and they told me to find my users manual! I can't find it. HELP!

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

Chronotherm IV installation issues. [ 4 Answers ]

I'm trying to update the thermostat in the house this weekend, and I am having some issues, and I wonder if someone could help set me straight with what I'm doing wrong... Just to be upfront - I don't know much about HVAC, we didn't really have them where I came from. I did replace the thermostat...

Wiring a Honeywell Chronotherm IV [ 3 Answers ]

What size wiring do you use for a thermostat? I need to move one from an exterior wall to an interior one. Also, any tips on fishing wires through insulation? Bringing it up the wall and over suspended ceiling and down another wall.

Common Wire on Honeywell T8624D Chronotherm [ 1 Answers ]

I'm replacing two White-Rodgers thermostats, one heating and one cooling with a Honeywell T8624D heating/cooling thermostat. I have three wires coming from the cooling thermostat (W, R & G) and 2 wires for heating coming from the transformer located in the wall at the thermostat which are both...

View more questions Search