 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell basic start modulation thermostat fc system fault
I have the above mentioned honeywell thermostat in my living room and it's now flashing constantly, but showing the room teperature. When I touch the thermostat it immediately starts flashing with FC. What does this mean.
|
||||
Check out some similar questions!
We just installed a Honeywell thermostat RTH111 non-programmable thermostat to our forced hot air/oil furnace. When I turn the heat up first thing in the morning, there will be a delay of anywhere from 10 mintues to over an hour before the furnace comes on. It will run to the correct temp and...
I have a oil heat only system with two wires- one green one white. After hooking up the White to the 'w' and the green to the 'g', and setting the programs, I woke this morning to a really cold house. I tried resetting the thermostat by removing the batteries, but even after overriding the program...
Just a quick question.
I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...
We just installed a Honeywell Thermostat on our Trane heating system/heat pump circa 1988. The system comes on for about 20 seconds, turns off, comes on again for about 20 seconds and turns off, then it will come on shortly thereafter and stay on for awhile. We had a professional hook up the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
