Ask Experts Questions for FREE Help !
Ask
    Andrewd098's Avatar
    Andrewd098 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 5, 2010, 03:49 PM
    I need help switching a American Standard thermostat to a Hunter set and save?
    I need help switching a American Standard ASYSTAT655A thermostat to a Hunter Set and Save model 44360 programmable thermostat. I need to know what the wiring schematic needs to be going into the hunter from the American standard.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jul 5, 2010, 04:00 PM

    I hate to say this but Hunter thermostats are junk and you will be better served by a Honeywell,White Rodgers,or Venstar.

    As for your question all you need is to mark the wires on the AMstd thermostat and follow the instructions for the other unit.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #3

    Jul 5, 2010, 05:54 PM
    And then hope it will work, you will be lucky if it works, and very lucky if it lasts 6 months

    And unlike Mr. HVAC1000,, I don`t hate to say it

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter thermostat not reaching set temperature [ 2 Answers ]

My hunter thermostat model 47110A is set to 20 degrees celsius but the furnace will not stay on long enough for the temperature to rise to the set degree. It is currently holding at 16 degrees instead. The batteries are brand new but still the temperature will not rise. This is my first home so...

Replacing an old Incesa Standard toilet with American Standard [ 0 Answers ]

Can the old Mexican version Incesa Standard wall mounted toilet be replaced with the new elongated version of the wall mounted American Standard toilet? Making sure both fits are standard connections... sizes, etc. I've heard 4" center and 4 1/2" center from floor. What do I need to be aware of...

American standard hunter 44860 [ 0 Answers ]

I am changing my thermostat... American Standard asystat655a to a new hunter 44860 and need the wiring diagram for both as the letters and colors are not the same, any help you can give will be appreciated.

American standard furnace thermostat wiring [ 1 Answers ]

Ijust purchased a new furnace, an American standard with Intell Ignition control (50A65-476). I am only using it as a furnace, no heat pump or air. The old furnace used a two wire thermostat. The new control has twin-Y-W-R-G-C. Which do I need and which if any need to be jumped to use the furnace.

Installing Hunter from American Standard [ 1 Answers ]

I am having trouble hooking up a Hunter 44860 thermostat. My old thermostat was an American Standard Thermostat ASYSTAT655A. Any suggestions would be most helpful, Thanks so much! Andy


View more questions Search