Ask Experts Questions for FREE Help !
Ask
    romtrac's Avatar
    romtrac Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2008, 08:37 PM
    Heil Quaker furnace installed in 1968
    Where can I find an installation/owners/parts manual?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 9, 2008, 09:05 PM
    Contact Heil direct

    HeilŪ Heating & Cooling
    tsa7man's Avatar
    tsa7man Posts: 154, Reputation: 9
    Junior Member
    		  
    #3

    Feb 10, 2008, 11:39 AM
    That is a pretty old Heil unit, the (ICP) Heil web site will not have that unit on the web. What are you looking for ? Post the full model number and serial number, and I might be able to find the part number for what ever you may need...
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Feb 10, 2008, 12:52 PM
    I posted the link so he could contact Heil at the factory. My Heil books do not go back that far.
    tsa7man's Avatar
    tsa7man Posts: 154, Reputation: 9
    Junior Member
    		  
    #5

    Feb 10, 2008, 02:43 PM
    ICP will not have them on file, ( I deal with their tech support every week) I have install / tech manuals in my office back to the early 1960's as hard copy manuals. He can try, or post the units model number
    robslater's Avatar
    robslater Posts: 1, Reputation: 1
    New Member
    		  
    #6

    Dec 7, 2010, 05:59 PM
    I have a Quaker 40,00 BTU wall furnace in my cabin up north. I think the Hi Temp limit quit on it and I had to jumper it out to get it to run.Where can I buy a new limit switch from? Its model # is WRF65A2N. I bought a Fan Switch # 05559 from Sears years ago but they do not know how to get the Limit Switch now. There is a bank of 3 switches in the middle of the furnace, it is the lower switch. After I jumpered it worked fine from the thermostatic. The pilot worked fine but would not open the gas value to light the burner unit. It works good now but I do not want that jumper on it for safety reasons. Where can I find which swith # it is and buy a new one? [email protected]
    a000612's Avatar
    a000612 Posts: 1, Reputation: 1
    New Member
    		  
    #7

    Nov 29, 2011, 01:18 AM
    How about a manual for a heil df-112 sn j 22337? Should have an install around 1961ish.
    Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace [ 10 Answers ]

I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...

HEIL furnace [ 1 Answers ]

Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion?

Heil furnace [ 2 Answers ]

I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info

Blower won't come on Heil furnace [ 2 Answers ]

I have a heil furnace in a home I just purchased. The first day it worked fine. Second day, it fires up, I can hear a motor running, but the blower doesn't come on. Relay switch? Thank You!

Heil 92% H9MPDO75F12B Gas Furnace [ 1 Answers ]

I had a Heil Gas Furnace installed and from the first day I notice that when the blower came on the air was on the cool side. After about 1 to 2 minutes the air became a little bit warmer but never got hot. My question is this normal or do I have a problem? Please let me know as soon as possible so...

View more questions Search