Ask Experts Questions for FREE Help !
Ask
    jermainesam's Avatar
    jermainesam Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2007, 01:13 PM
    Heater blow cold air
    I have a Honeywell T8001C thermostat. I programmed all the times and tried to use the HOLD function on this thermostat and it continues to blow cold air. Can anyone help me figure out what to do?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 23, 2007, 05:10 PM
    Manual

    http://customer.honeywell.com/techli...0s/69-1431.pdf

    Product data

    http://customer.honeywell.com/techli...0s/68-0195.pdf

    Besides looking over the instructions for your thermostat you might consider your furnace has a problem. Does the furnace work on (burner on) with any setting?
    jfoy66's Avatar
    jfoy66 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Dec 23, 2007, 09:17 PM
    I have a Goodman gas furnace that was used for the 1st year and a half, since then I have not used it for 4 years. I recently had it turned on, it was working just fine for about 1 week then, it would shut off and on but, it would blow out cold air. Everything is checking out OK, the furnace is working, gas line is open, but it is not igniting.
    HELP!
    AC Doc's Avatar
    AC Doc Posts: 12, Reputation: 1
    New Member
    		  
    #4

    Dec 24, 2007, 07:05 PM
    The new thermostat may have a electric gas switch on it that decides how to operate the fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washer dryer blow cold air after normal working 5 min. [ 3 Answers ]

My Whirlpool gas dryer ( 6 years old ) blow cold air after normal start working 5 minutes. Check flame from panel hole ( normal ), no clog on vent,short hi limit thermostat After flame cut off try to restart, I saw ignitor glow but after 3 second then go out, I have to wait for a while then...

Trane gas furnace only blow cold air [ 3 Answers ]

My 10 years old trane gas furnace would not blow out warm air, only cold air. I checked gas is on and electric switch is on. Every thing seems normal. It may be the ignition problem. How can I find out? Your help is greatly appreciated Bass

Central Heater comes on but fan not coming on to blow heat [ 2 Answers ]

This morning our heater came on at appointed time but the fan never came on even when we switched it from auto to on setting. We have a 8 yr old split system, (2 stories) & its worked fine until today. Is there anyone that can give us a few likely scenarios to try & fix ourselves before we have to...

Heater kicks on but doesn't blow or stay on [ 1 Answers ]

Heater doesn't kick on below 70 degrees. When it does kick on with thermostat set higher than 70 it will turn on run and then blow. (Pilot light works) Doesn't blow as long as it should then shuts off and idles (runs) again. Had a certified furnace repair person look at it. The limit switch was...

Can't get furnace to blow hot/cold air! [ 4 Answers ]

:confused: I recently moved into a house & I can barely tell that any air is coming out. I have just paid to have all the ducts cleaned. Please help me figure this out.

View more questions Search