Old houses... great aren't they? I have a new dilema. Seems as though the well motor is beginning to short cycle during a shower or if the washer is running. I would suspect the pressure switch, however I do not know which side is the low side and which is the high side, nor do I know where to...

I've got a new pump, new control box, new pressure tank(with bladder), new pressure switch, but... I can't get my well to stop short cycling, I've checked and my bladder psi is 38 and pressure switch is set for 40-60; sometimes it will cycle when closing in (40psi) click, click, click until I open...

Hello Again, Thank you for the previous help suggestions. The last suggestion I received mentioned the possibility of a defective limit switch. I replaced the switch but that did not solve the problem. However, I did received a fault LED, "defect or flaw in gas flow". I checked my line,...

I have a Trane XL80 (Model #TUD060A936A0) that has been converted to a White-Rodgers (Model #50E47-060). When the thermostat calls for heat, the furnace short cycles until it is manually shut off. There is no indicator light on this unit to tell me what the problem may be. What else could...

I have a well pump on a 40 60 pressure switch. When a tap is open the pump kicks on and off every 30 seconds or so. The pressure tank is small probably 40gal? When the water is flowing you can watch the pressure gauge drop in pressure, and then watch as it moves up when the pump kick in for 20...