 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat pump connecting
My heat pump motor top bearing went bad . I bought a replacement motor . My motor has 4 wires and the replacement motor has 5 wires it's a 2 sp motor the colors are brown brown/white black ,white ,red the old motor has brown ,black, red, blue How do l connect it ?
|
||||
Check out some similar questions!
I have a newly installed ruud 13 seer heat pump, it works fine. It emits a constant hum,louder sometimes than others, this hum continues when machine is off, it will only cease when power is off to machine. I have heard various transformers sound similar,but should this heat pump make this...
Replaced tstat.. tech added 2 lbs r22.. but it didn't register on his gauge that he had added any... worked for a day.. didnt need heat for 3 days... then had to reset house electrical for cooling to come on... now heat cme on for 5 minutes then went into aux heat...
Having trouble getting new Honeywell TH8320 digital thermostat to work with my Rheem split unit heat pump. I used the manual that came with the thermostat and hooked it up as instructed, but had the orange wire left over. After some research I figured out that the blue wire should be connected to...
Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump
Installed new units 2 1/2 ton goodman units, installed factory 14.25 kw heating element. My biggest problem is the low voltage wiring. The indoor unit has 5 wires coming out they are red,green, white, brown, blue. The outside unit has 5 wires also, blue, white, orange, yellow, red. The cond....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
