Ask Experts Questions for FREE Help !
Ask
    momar's Avatar
    momar Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 15, 2010, 08:23 PM
    My heat not working
    I replace install new flam sensor and new ignition
    No flam. Bur every thing ales working
    And I taste the flam sensor volt I'm getting 76v
    Also taste ignition getting 1.6v
    Please if can help?
    momar's Avatar
    momar Posts: 2, Reputation: 1
    New Member
     
    #2

    Nov 21, 2010, 07:37 PM
    The problem was not getting 24v gas valve
    Take u time to look every small problem u may not think of it
    Omar

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman cpl t30-1a heat pump, heat not working/no compressor or fan operation [ 5 Answers ]

The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.

Heat strip not working on my goodman heat pump [ 1 Answers ]

Heat strip not working on my goodman heat pump

Emergency heat on, Aux heat off, fan working. [ 29 Answers ]

I do have heat. The fan outside is working on the heat pump. Inside unit is on. Heat Pump is set to Aux heat, with AUTO for fan. But the Aux heat is NOT what is on. The Aux light is OFF. I do NOT have it set to emergency heat, but the emergency heat light is ON. :eek: What is...

Heat and Air not working on Attic unit, but blower working. [ 1 Answers ]

The blower is working fine on our Heating and Air Conditioning unit but neither the Air or Heat will work. The emergency Heat works fine though. The unit is a Carrier with the words American Standard written on the outside fan unit. What should I look for before calling a tech or what would this be...

A/C working, switched to heat, now ac and heat don't work [ 1 Answers ]

Hello, Replaced my thermostat in the summer, everything worked good,switched the new thermostat to heat for the first time, now neither the A/C or heat work? Any Ideas? Andy


View more questions Search