Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Thermostat heat/ac
[ 5 Answers ]
I think the control inside your home that turns Heat and A.C up and down is called a thermostat. Having said that I wanted to know if it is a big job to replace one? The one I have is only about 2 years old but it never worked right and I want to replace this one myself. I do a lot of things...
Replaced thermostat - no heat or a/c
[ 7 Answers ]
Hello - I have an Amana a/c with gas heat Took out my old Honeywell T8195 thermostat to replace with the Lux TX1500 Wired it up as follows (Lux - color - Honeywell) RH - Red - R RC - connected to RH terminal G - Green - G Y - Yellow - Y
Heat Pump Thermostat
[ 1 Answers ]
I have a Heat Pump by Unitary Products, Model F2FP036N06B with a White-Rodgers thermostat, Type No. 1F89-11. The 5 amp fuse controlling the thermostat has blown three times in the last 24 hours. After replacing the fuse, everything seems to work normally for a few hours before it blows another...
Thermostat settings and heat
[ 3 Answers ]
It seems like my heat pump blows nothing but cool air out of the vents. It is below 10 degrees out right now. I have an them. Het setting on the thermostat but when I switch to that setting the air from the vents feels cool or just not very warm. It also seems as if my furnace never shuts off. ... View more questions Search
|