 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heartier does not switch on properly
I have a central heat and air unit, its not a heat pump, it does not switch on properly if the thermostat is set at 72 it won't turn on until it is well below 60 degrees then only runs for a little while and does not reach selected temp. it I turn it off then back on to auto it will ryan for a while if the temp is lower than the selected. I have changed the thermostat 4 separate times and it is wired correctly I just put in a brand new honeywell thermostat and no difference in the problem. Anyone have any ideas
|
||||
Check out some similar questions!
I had to run a new wire from switch to light because it got cut, but thought I put everything back the same way it came out. However, I have lost dimming functionality. Still have on/off, but nothing in between. Wiring is 14/2 from breaker > plugs > switch, 14/3 switch > light, 14/2 light >...
I am trying to replace an existing stairway light switch with a dimmer switch. The light switch is at the top of my basement steps. I have no switch at the bottom of the steps, so I had assumed that the switch was single pole. When I removed the switch plate, I saw an extra wire going into the...
Hi I had to install a light fitting and switch we only had 2 cables the 1st had 2 wires went to another light fitting, the 2nd had 3 wires which went right across the house to the circuit board I guess, so I put the 1st cable into the light fitting then the second to the light switch then I brought...
I have a problem with an in wall light switch that I have never run across before. I have a 2 light 4 foot fluorescent light fixture in my utility room that is turned on and off by a wall switch. I recently replaced the fixture with a new 2 light 4 foot fluorescent fixture. Once installed I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
