Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ruud achiever ac/ heat pump with aux heat.. electric.. pump in high pressure lockout...
[ 0 Answers ]
Replaced tstat.. tech added 2 lbs r22.. but it didn't register on his gauge that he had added any... worked for a day.. didnt need heat for 3 days... then had to reset house electrical for cooling to come on... now heat cme on for 5 minutes then went into aux heat...
Troubleshooting a Ruud heat pump?
[ 3 Answers ]
I have thermostat on heat set at 73, airhandler comes on but outside the outside unit isn't running. Just happened tonight.
Ruud heat pump troubleshooting
[ 2 Answers ]
I have a 2 ton Achiever and the fan has stopped running on it. It feels warm to hot on the top cover at the motor mount. I ohmed the 3 motor wires to be good. I measured the capacitance on the 35/5uF cap and the fan side is off by 4% while the sticker showes +- 6% tolerance. I also replaced the...
Ruud heat pump troubleshooting
[ 0 Answers ]
I have a 2 ton Achiever and the fan has stopped running on it. It feels warm to hot on the top cover at the motor mount. I ohmed the 3 motor wires to be good. I measured the capacitance on the 35/5uF cap and the fan side is off by 4% while the sticker showes +- 6% tolerance. I also replaced the...
Rheem 10 seer heat pump Troubleshooting
[ 1 Answers ]
I have a Rheem 10 Seer Heat pump about 10 years old. It has been in the 20's & 30's the last month and my electric bill was $700. The bill before that was $200 and the temp probably averaged 30-35 that month. I know the auxillery heat will kick in when the outdoor units are not heating enough... View more questions Search
|