Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman GMP100-3 Furnace won't Stay On.
[ 14 Answers ]
Hello, I have a Goodman Furnace (model # GMP100-3). The furnace will not stay running. Here is the sequence of events for two different scenarios that are occurring. Scenario 1 1. Thermostat Calls for Heat 2. Inducer starts 3. Pressure switch closes 4. Heating element glows 5. Burners...
Goodman furnace comes on but won't stay lit
[ 6 Answers ]
Hi my goodman furnace tries to lite but something cuts the gas right back off. Is that the gas regulator? And can I just replace the module on the front of it or do I have to replace the whole regulator? Thanks Brian
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman furnace won't stay lit
[ 1 Answers ]
I have a goodman furnace that goes like this. Inducer fan comes on, 10 secs later glow lights up, 10 secs later get blue flames 10 secs later blue flames goes out. Repeats 3 times I have replaced the flame sensor still same problem But here is the thing. I am only getting 10 volts to the...
Goodman Furnace won't stay running
[ 3 Answers ]
I have a goodman furnace that won't stay on.. the glow plug comes on and ignites the heat box, it will run then shut off... after it gets to desried heat,, then when you try to get it to run again it's like it shuts down after igniter being lit for about 10 secs, I've replaced batteries in... View more questions Search
|