 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a goodman furnace; I don't know the model number, but it's not working.
There are 2 blowers on it, but one of them was not working, so I took it to the store to have it checked, and he said it worked just fine, so my problem must be the circuit board. Is there anything else that I can check?
|
||||
Check out some similar questions!
The inducer fan motor starts,the hot surface igniter heats up and the gas valve opens producing a nice blue flame for 3 or 4 seconds and the gas valve shuts off. There are no red flashing lights to indicate a problem with any components. This unit was built around 1993. Any ideas on what might be...
I need assistance in wiring my goodman furnace model number ARUF303016AA
I need to know where to locate the filter on my goodman ac unit. Model no. ck30-1a
The blower works when thermostat is switched to Fan, but there is not heat. Once I switch to Auto, there is not heat and the blower does not work. Temperature is set above the current room temperature. Would that be caused by a board issue? The red light just stays on, does not blink at...
I need help getting my goodman furnace working, I've changed the igniter and the pressure switch and it still isn't working. The light keeps blinking and it says on the door that it's a 115v reverse polarity, does anybody know what that means?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
