 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts
My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.
|
||||
Check out some similar questions!
I have a Frigidaire\Nordyne G6RA 096C-16 gas furnace. The electronic ignitor lights the gas. However, when the blower comes on, the gas shuts off. This happens repeatedly. I turned off the furnace, waited a few seconds, and turned it back on. It worked fine for the first thermostat cycle...
I have an old janitrol furnace the kind you have to ligh the pilot then turn the knob for tha main burners to come on. The problems is when I light the pilot it stays lit, then I turn the knob and all the burners light up and it goes for about 10 seconds then its like you went to the gas shut off...
Last winter I had a hot plate igniter replaced. Near the end of spring the igniter would ignite the furnace and after 10 to 15 seconds, the flame would go out. About a minute later the hot plate igniter would glow, the gas will ignite for another few seconds and go out. After several cycles the...
Hello, I have a Frigidaire gas Furnace model FG6RA072C-12 . I was wondering if anyone knew what the square footage is that this furnace can heat efficiently? Is this furncae for a "Ranch" style dwelling or a multiple level? I can not find this model on any website . Come close but not the same...
My furnace randomly lights both sides. After the igniter comes on, the gas kicks in on the igniter side but not on the temp. probe side. It seems that the gas doesn't flow over to that side after it comes on. Is it a blocked valve or gas jet?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
