I already replaced the circulator and thermostats. This is oil fired furnace with baseboard heat. T he pressure on the furnace is running about 30 psi
Check out some similar questions!
Weil Mclain 18yr old furnace - 1 "failed" zone of a 4 zone forced hot water system [ 0 Answers ]
I just bought a house that was built in 1993 and has a gas fired Weil Mclain furnace, forced hot water, with 4 zones - each with a Taco Zone Valve. The system also has one circulator pump. In late fall, I ran the system and all zones worked fine. When winter came and system was on 'full time', it...
Dual zone heating - downstairs zone sweltering [ 4 Answers ]
I have dual zone heating in my condo and the upstairs is working fine but the downstairs is sweltering hot. (80 degrees) I am not cooking and do not have my clothes dryer running. The thermostat is only set to 68 but the system still keeps kicking on. This just started last night. The thermostsat...
NO Heat in One Zone of Multiple Zone System [ 6 Answers ]
The heat in our four zone house is working except for one zone. Digital Honeywell THermostat lights up when programmed, little flame picture appears and click noise is heard, just like other thermostats, but no heat in that zone. Any ideas what is wrong or how to fix. Thanks
Zone heating. One zone won't turn furnace on. [ 3 Answers ]
Hi All, I am using two Honeywell V8043E1012 motorized valves. One zone works but the other one you hear the thermostat click on when you raise the temp but the furnace does not come on. When I use the lower floor thermostat the furnace turns and I get heat upstairs. Is this the problem of the...
2 zone oil heat, 2nd zone runs 1st zone [ 1 Answers ]
Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low...
View more questions Search
Add your answer here.