Ask Experts Questions for FREE Help !
Ask
    wtrii's Avatar
    wtrii Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 24, 2010, 03:43 PM
    I have a Carrier ac/furnace and need to know the location of the 3amp fuse Thanks
    I have a Carrier ac/furnace and the 3amp fuse keeps blowing. I had a tech out two days ago replaced thermostat and the fuse and it worked for 36 hours. The fuse I think has blown again. I found a chafed wire behind the new thermostat and trimmed it. However, I do not know the location of the 3amp fuse to replace it again. I have the cover panel off and do not see the fuse. If you can help with the location I cannot thank you enough as my home is now at 90 deg. Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    May 24, 2010, 03:55 PM

    Usually on the furnace board. Looks like an automotive fuse.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

E fuse in Carrier gas furnace keeps blowing. Should a different fuse be used? [ 1 Answers ]

E fuse in Carrier gas furnace, model 58MCB, keeps blowing. Should a different fuse be used, or is the problem likely in a component.

Carrier 58CMA120-20 Fuse Location [ 4 Answers ]

I have a Carrier furnace (oil) Model #58CMA120-20 which I recently attempted to install a Ritetemp 6036 thermostat to. The fan and heat do not work. The support desk at Ritetemp recommended that I check/replace the fuse on my Carrier's mother board. I do not see a fuse anywhere on the motherboard....

Comfortmaker Furnace fuse location [ 5 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I turn on the furnace up past the room temperature the furnace ignites as it should. Once I turn the temperature down below room temperature there is a faint buzzing noise. After...

Blown 3amp fuse [ 1 Answers ]

Three year old rheem gas furnace kept blowing 3amp fuses when calling for heat, fan and a/c work fine.I attempted to troubleshoot by disconnecting components and running it.It seemed that I isolated problem to control board.After reading many posts online about similar problems I decided to install...

Turning on A/C blows 3amp fuse on circuit board [ 1 Answers ]

Hi, Hope someone can help me. As stated in the title, when ever I turn the a/c on it blows the 3 amp fuse on the board. The system works fine with heat on. It's only when I activate the a/c does it burn. I have no idea what is causing the fuse to blow. Does anyone have any ideas of where I can...

View more questions Search