 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a beacon/morris bmf-125.
The unit makes a loud electrical type humming when power is applied. Also the pilot will not stay lit. the thermocouple has been changed twice just in case. I have swapped the transformer from another unit of same. The fan will also start up even with no heat. HELP ?
|
||||
Check out some similar questions!
I have a garage heater, ceiling mounted, Beacon Morris, BRU-45. I am trying to fire it up for the first time this season. Blower comes on, glow plug works, but no ignition.
After just one winter of use my heater quit working when it calls for gas, gas came on but it would not ignite so I replaced the igniter, still did not work so I called a repair man he told me that the control board was bad so now I have a heater that is two years old that I paid approx 650 dollars...
45K BTU garage/shop heater. POS from day 1. I have replaced the ignitor, now after reading the book(AGAIN) the 4 flashes indicates that either my Roll Out Switch or Hi Limit Switch need to be reset - my question is this. What type/amount of resistance should I measure on these two switches to...
I have a Beacon Morris BTU 45 garage furnace. When I turn it on it goes through the process of heating with the exception of no heat.The blower starts up to expel any gas, the ignitor lights up and then the main blower comes on. I put a flame to the burners and nothing happened. It seems like...
Hello I just purchased a Beacon Morris garage heater. It is a BRU-75. I was wondering if anyone could tell me where I could purchase a thermostat for this particular model. I want to have a switch on the thermostat that will let me shut off the unit when I don't want it to run. I don't want to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
