Ask Experts Questions for FREE Help !
Ask
    swish_b's Avatar
    swish_b Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 1, 2007, 03:29 PM
    Hard start
    The hard start on my carrier ac38cmc030310 is burned out and I'm not sure of how to wire it back in .I had a ac check and the repairman took it out so I did'nt see how the old one was wired also would it work without it. It's only two years old.
    There is a blue wire from the harness that goes to the hard start then a blue and yellow off the hard start.?
    Thanks Bob
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Apr 1, 2007, 06:23 PM
    Quote Originally Posted by swish_b
    The hard start on my carrier ac38cmc030310 is burned out and I'm not sure of how to wire it back in .I had a ac check and the repairman took it out so I did'nt see how the old one was wired also would it work without it. It's only two years old.
    There is a blue wire from the harness that goes to the hard start then a blue and yellow off the hard start.??
    Thanks Bob
    Here is a GE Adobe diagram.
    Attached Images
  1. File Type: pdf Start relays.pdf (253.2 KB, 1046 views)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

92 honda accord hard to start when cold [ 20 Answers ]

Hi: I'm having a problem with my honda ,when I start it on the morning ,when is cold the car crank and start but stop after a second and then I started it again and I have to depress the gas to keep it running and the rpm goes up and down from 700 to 2000 rpm and I have to keep holding the gas...

Help my 93 civic is hard to start [ 9 Answers ]

OK I have a 93 honda civic with a d15b7 engine in it and sometimes it starts fine and other times it doesent want to start at all,I just put brand new ngk sparks plugs in it the other day but its still doing it can someone help me out please?

18.5 Briggs Hard To Start. [ 1 Answers ]

A B&s 18.5 Ohv With Avs. Won't Go Past Com. Stroke When Starting. Checked Batt. Anj. Valves. Same Thing Wrong. Can Turn Back By Hand And Start. Don't Know Where To Look Now. Maybe Something In The Avs?

Hard Start Capicitor [ 1 Answers ]

The red wire running from the contactor to the hard start capacitor Keeps burning. Replace the spade and it works for a while. How can I troubleshoot this? Thanks


View more questions Search