Ask Experts Questions for FREE Help !
Ask
    jillybean68's Avatar
    jillybean68 Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2013, 05:56 PM
    Goodman GMP100-4 furnace issue
    I have a Goodman GMP 100-4.
    My problem is the blower is not blowing. The unit is blinking 4 times. From my research, this appears to be the limit switch or auxiliary switch.
    The blower wheel will not turn by itself, but we are able to reach in and rotate it which then starts it. However, when the house reaches the temperature on the thermostat and shuts off, it will not kick on again unless we manually rotate the wheel. I have tried locating the limit switch and auxiliary switch, but the manuals and part images I find online have been poorly illustrated and I'm having trouble identifying these parts.
    Does this sound like a limit or auxiliary switch issue? Can you direct me to a place that show a good illustration of the parts?
    I hope I've explained this clearly - I'm a novice with furnaces.
    Any help/advice is greatly appreciated!

Check out some similar questions!

Goodman furnace gmp100 4 diagnostic codes [ 2 Answers ]

I have a goodman 100-4 rev8 and believe it was born in 1993. I have cleaned the flame tubes and replaced the flame senser and I have also bi-passed the rollout switch's trying to diagnose why it ignite's but will not stay fired.all my knowledge tells me it's a faulty safety issue.What am I missing...

Goodman GMP100-3 Furnace won't Stay On. [ 14 Answers ]

Hello, I have a Goodman Furnace (model # GMP100-3). The furnace will not stay running. Here is the sequence of events for two different scenarios that are occurring. Scenario 1 1. Thermostat Calls for Heat 2. Inducer starts 3. Pressure switch closes 4. Heating element glows 5. Burners...

Goodman gmp100-5 furnace fan stays on [ 1 Answers ]

My Goodman furnace fan stays on... even with the thermostat disconnected. The red status light stays illuminated the whole time. Do I need a new control board maybe? Any help appreciated. Thanks...

I have Goodman GMP100 furnace. The vent blower won't run [ 1 Answers ]

On the Goodman GMP100 furnace, the vent blower tries to run but stops immediately. The status light blinks 3 times. Is there a way to find out if the vent pressure switch is defective?

Installing a Goodman GMP100-3 Furnace [ 8 Answers ]

I know a model GMP furnace is a multi position unit, but does that mean it can be installed upside down (needs to be downflow)? Just checking before the installer does this...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.