Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman Furnace -takes 2 Or 3 Ignition Cycles before Stays Running
[ 2 Answers ]
Hi,hope you can help me out.i have a goodman manufacturing forced air furnace that i believe is giving me a warning sign of a future failure.what has happened is in this order,1st one morning the thermostat showed that the furnace was on and it was'nt.turned it off and then back on at the...
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Furnace won't stay running
[ 1 Answers ]
I have a goodman furnace that won't stay on.. the glow plug comes on and ignites the heat box, it will run then shut off... after it gets to desried heat,, then when u try to get it to run again it's like it shuts down after igniter being lit for about 10 secs, I've replaced batteries in...
Kerosene furnace won't stay running unless .
[ 1 Answers ]
I have a kerosene furnace that needs to be bled every time in order for it to run what could be the problem (I have 1/4 tank of fuel ):confused:
Won't stay running
[ 14 Answers ]
I have a 91 crx it sat up since may and I just put a d15b vtec in this past weekend. I sat the engine in and hooked up all appropriate connectors with the exception of two wires that is close to the intake manifold (yellow w/ green and a black) I have no clue where they go all I know is if you... View more questions Search
|