Ask Experts Questions for FREE Help !
Ask
    pgeon1's Avatar
    pgeon1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 1, 2009, 11:19 AM
    Goodman Furnace won't ignite
    I have a Goodman furnace model # gun1004b that won't ignite. Evertime I tap on the selinoid it ignites properly. Would the gas valve be bad?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 1, 2009, 01:28 PM
    It could be the gas valve or a loose wire connection or bad ground. If you have what is called a smart valve then it is a valve problem.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace won't ignite [ 30 Answers ]

I have a 80% GMH8 goodman furnace that won't ignite. I can manually light it when the gas valve opens and it will run fine and shut off like normal. The glow plug ignitor doesn't come on but a couple of times I have saw it glow for a sec then go out way before the gas valve opens. The furnace was...

GMH8 goodman furnace won't ignite [ 15 Answers ]

I recently had a GMH8 goodman furnace installed in the summer and after it was installed it fired right up, but now that I don't need the air and its time to use the furnace it won't ignite. It starts to cycle but when its time to ignite the burners it shuts back off and tries to ignite again. When...

Goodman furnace won't ignite [ 1 Answers ]

I don't know much about furnaces. Mine is a Goodman GMT090-3A. It is five years old and it has failed 3 times. The igniter was replace twice and the last time, the serviceman said the gas valve was faulty. The part was under warranty but he didn't happen to have one in his truck so he banged on...

Goodman furnace won't ignite [ 5 Answers ]

I have a Goodman 100-3 furnace. When I turn on the thermostat, the draft inducer motor starts and continues to run but the burner isn't lighting and the led has a steady blink. I have checked the rubber hose to the pressure switch as well as both inlets and all are clear. The filter is new. Any...

Goodman Gas pack won't ignite [ 1 Answers ]

I have a Goodman Gas pack, model # GPG10300701A, the exhaust bloewr on the side will come on as usual but the unit will not ignite. Usually when it comes on it will tick tick ignite, but I am not getting the spark(tick), its like there is no attempt to ignite. I keep seeing quotes about LED blink...


View more questions Search