We just installed a 70,000 BTU goodman furnace and it worked fine then it gave the code of 4 flashes. We tested eveything and still locked out.
Add your answer here.
Check out some similar questions!
Goodman GDH8 lockout, Service Nightmare [ 47 Answers ]
Hi all, Had a Goodman GDH8 installed not quite 2 years ago, last winter just 2 months out of warranty, it started acting up. From what I've read, a somewhat typical issue where the ignition system starts, glows all nice and red, then with a click and a hiss, attempts to light the burner, and it it...
Kenmore 90 Furnace goes into lockout [ 2 Answers ]
My furnace is a Sears Kenmore 90 (Propane) The info on the placard inside the cabinet is: MFG.: HQCD (I believe it to be a TempStar) Model: NULK125DK03867 Mfr. No.:NULK125DK03 The problem: Thermostat calls for heat The ID fan starts and I've inspected the vent and there is air being blown...
Furnace lockout [ 1 Answers ]
I have a Bryant furnace model 394GAZ036100. The problem I am having is intermitant. Furnace will run fine sometimes 6-8 hr, cycles OK and then doesn't start up on calling for heat. If I shut of power and turn it back on it will start and cycle OK. Never has messed up while I am sitting there...
Gas furnace lockout [ 1 Answers ]
My gas furnace will light, but then the flame goes away within a few seconds. It does this several times and then the LED light blinks six times which the sticker on the furnace indicates means a system lockout. What can I do to repair this?
Gas Furnace Lockout Timer [ 1 Answers ]
I have a Carrier gas furnace that I believe has a bad lockout timer. The furnace will sometimes run sometimes run then shut off and other times run fine. When it would suddenly stop I tapped on the lockout timer and it ran again, that makes me feel the lockout timer is bad but now when the...
View more questions Search