 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas won't kick on in bryant unit until you pull the fuse, and put it back in?
Myy unit had been working fine until the capacitor went. Had it replaced in November. Then, in Dec. mu unit would run, but no heat. The technician came out and said we didn't have enough gas in the propane tank. It was on 25percent. We had our tank filled, but now, sometimes the unit is running, but no heat. We have to go outside, pull the fuse out, wait @ 1 minute, the put it back in. Heats fine.
This is a Bryant unit, @ 8 yrs old. |
||||
Check out some similar questions!
We put a new thermostat fuse and fuse box in our dryer because it was not heating. Now it does not start. Did he put the wires in wrong or what. What do we need to do? What wires go where?
Bryant 383KAV024070AGJA furnace not working after intall of Honnywell humidifier 360 (pered fan). Flashing LED 2-4 suggests "24 v secondary fuse open". How do I replace/reset fuse and how do I wire the Humidifier correctly this time?
Our AC/Heating Unit (electric/gas) suddenly stopped working. We reset the main breaker, but it didn't fix it. The thermostat clicks when I try to adjust temp, but the fan doesn't come on for the air & the furnace doesn't come on for the heat. Nothing is blowing through the vents. Any ideas?
Hi All: I have Bryant plus 90 gas furnace and used to have Lenox Mercury thermostat. Heat will kick in for 15~20min after every one hour. Does not follow thermostat. So just change a new Honeywell programmable thermostat, but it is still doing the same. At the furnace LED indicator blinking 3...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
