Ask Experts Questions for FREE Help !
Ask
    charliek1011's Avatar
    charliek1011 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2011, 04:14 PM
    My gas furnace keeps running well after it passes the set temp.
    I set the desired temp on the termostat ( 70 F ) and the furnace keeps going until we get to 90F. It blows hot no matter what... It eventually kicks off but sometimes it takes hours...
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #2

    Oct 19, 2011, 05:52 PM
    Brand and model of furnace please. Thank you.
    charliek1011's Avatar
    charliek1011 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 19, 2011, 08:09 PM
    Brand : Goodman Model number CAPF4860C6BA
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #4

    Oct 20, 2011, 05:05 AM
    Your model number is inside the furnace... that happens to be the model number to the indoor coil that sits on top of the furnace for your A/C. Try this in the mean time... remove the stat --> jumper the red and white wires to call for heat --> let furnace cycle a bit and then un jumper the wires. Let me know if the furnace cuts off. I think your stat is bad.
    Bigstew's Avatar
    Bigstew Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Oct 20, 2011, 06:09 PM
    My York furnace just keeps on running after the set temp
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #6

    Oct 20, 2011, 06:27 PM
    BigStew, try the same as I suggested to Charlie.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will not come up to set temp [ 0 Answers ]

When the thermostat is set at 70 temperature only comes up to 58

Why is my furnace not getting up to the set temp. [ 1 Answers ]

I have a gas furnace that we run with propane. For some reason it will not stay uo to temp, we have the thermostat set at 72 and it only reaches 66-68 then shuts off. It seems to not want to kick on as often either. We just replaced the thermostat so I know its not that. Would it have anything...

Ruud Gas Furnace not running up to set temp. [ 0 Answers ]

I have a Ruud gas furnace that is 3 years old. The heater ignites and runs for 1 -3 minutes with warm air blowing out, then shuts off. It repeats this cycle until it goes into lock-out. The heater never runs long enough to get up thermostat temp setting. Any ideas?

Rheem criterion II gas furnace keeps turining off before the set temp. Is reached [ 0 Answers ]

I have a rheem Criterion II gas furnace and it keeps turning before the set temperature is reached. It winter rite now so it gets kind of cold here in Chicago, so I need this prob. Fixed!

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

View more questions Search