Ask Experts Questions for FREE Help !
Ask
    wackyzoomy's Avatar
    wackyzoomy Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2009, 04:38 PM
    Furnace won't stop blowing
    I have a york diamond 90 gas furnace. When it is done heating it goes into the cool off mode it will not stop blowing cool air. Even when the furnace is off it stays running. Pulled off panel so the safety switch will shut it off as soon as I put door on it starts blowing again cool air. All the time the thermo is off
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 16, 2009, 06:06 PM
    If the furnace is heating normally and the only thing that is having a problem is the furnace blower staying on all the time then the furnace fan and limit control or the fan blower relay is defective. Fan and limit controls look like the pics below for the most part. If you have a blower relay problem it is probably on the control board.
    Attached Images
       
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Jan 16, 2009, 06:15 PM

    Look to make sure the tstat isn`t set on fan or fan only instead of auto,, if its on fan it will run all the time
    wackyzoomy's Avatar
    wackyzoomy Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Jan 16, 2009, 06:50 PM
    Thank you guys for the help. Lets just say I feel like a complete dumb a?? The thermo was set to fan on instead of auto. I looked at it a hundred times before I even seen it set to on. Just blew it off thinking it was right. Well at least the furnace is clean. Thanks a lot guys. Just found this site I will be back. JEFF
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #5

    Jan 16, 2009, 07:16 PM
    LOL That has happened before but I usually do not post that since some people take offense when I tell them to check the blower setting on the thermostat. I had one poster call me a name I will not repete when he said I was very stupid to ask that since he was not that dumb.

    I am glad it was a simple repair for you.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #6

    Jan 16, 2009, 07:20 PM

    I`ve been called those names not worth repeted before it doesn`t bother me,, they are the ones who has to answer for it,, I just try to help if I can
    wackyzoomy's Avatar
    wackyzoomy Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Jan 16, 2009, 07:46 PM
    You always need to get the easy problems out of the way first. THANKS GUYS
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why does my furnace blows out cold air when it should be blowing out hot air? [ 7 Answers ]

Why does my furnace blows out cold air, when it should be blowing hot air?

Why is my furnace not blowing heat when in auto? [ 1 Answers ]

Hello, I turned on my heat this year and worked great. For the last couple days I haven't heard the heat kick in. I hit the reset switch and it kicked on and then went off, haven't heard it again. I turned the heat on fan. The fan kicks on right away but seams to be blowing out cold air not warm....

Bryant furnace blowing cold air and pilot won't lite [ 1 Answers ]

Hello, I purchased a Bryant gas furnace about 10 yrs ago. When I woke up this morning it was blowing cold air. My brother went down and looked at it and there was a red "led" light flashing on/off when he tried to get it to start back up. It was liting but now it isn't. Please help! :confused:

Furnace bower will not stop running [ 1 Answers ]

I have a 7 year old 80% efficiency Tempstar gas furnace. The blower fan will not shut off. Thermostat is good. How do I check whether the problem is the fan and/or limit control, or the circuit board? What and where is the limit control?

Furnace bower will not stop running [ 3 Answers ]

I recently replaced my thermostat and the heater worked fine for a few months. Now the blower fan will not shut off when the room reaches the set temperature ( same problem I had before the new thermostat). I installed another known working thermostat and the problem remained so I know it is not a...

View more questions Search