Ask Experts Questions for FREE Help !
Ask
    partsmanager's Avatar
    partsmanager Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 20, 2010, 10:04 AM
    Furnace won't stay lit.pilot light is on but burners will ignite but don't stay lit
    Dennis1523's Avatar
    Dennis1523 Posts: 54, Reputation: 2
    Junior Member
     
    #2

    Dec 20, 2010, 10:31 AM
    It sounds like the flame sensor/thermocouple/millivolt generator. It is located in the flame of the pilot lite. You may be able to clean it with a screw driver and get by for a while. Some hardware stores carry them but not many.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My pilot light won't stay lit [ 6 Answers ]

Help,I have two problems.. My upstairs furnace pilot light will light,and after holding down the pilot button for about 3-4 minutes(it says one minute,but it won't stay lit after only one)it stays,but will go out again in a day or two... The furnace for the downstairs won't light at all.. I can't...

Gas furnace pilot won't stay lit [ 1 Answers ]

About 1 month ago pilo light wouldn't stay lit so I replaced the thermocouple.. The unit worked fine for about 2 weeks. After that when relighting it would go out after 1 day or so. Bought a new thermocouple and this one would only keep the pilot lit for 1 to 2 hours. Reinstalled the thermocouple I...

Furnace pilot light will not stay lit [ 1 Answers ]

I have a Coleman furnace in my mobile home and the pilot light went out. I can light the pilot light but as soon as I release the pilot button and try to turn the furnace on, the pilot light goes out. What are some good troubleshooting steps to resolve this problem?

Pilot light won't stay lit [ 1 Answers ]

Why does the pilot light on my hot water heater go out after about 10 minutes of being lit?

Pilot light won't stay lit [ 2 Answers ]

I have a Bryant Heater on upstairs ofmy central unit. I can light my pilot light and the unit will start heating. The it shuts off. The fan continues to blow and the heater still works, but the pilot light goes out and has to be re-lit. Is that the thermocouple? I have a Bryant 394had036050...


View more questions Search