Ask Experts Questions for FREE Help !
Ask
    glennc47115's Avatar
    glennc47115 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 5, 2007, 06:26 PM
    Furnace will not shut off
    I have an electric Coleman furnace which comes on when it should, but will not turn off
    When the set temp is reached. Even manually using the on/off switch will not stop it.
    The only way is to flip the circuit breaker. What is going on ?

    Thank you.:confused:
    jake4's Avatar
    jake4 Posts: 29, Reputation: 1
    New Member
     
    #2

    Mar 5, 2007, 07:51 PM
    With the information given I would say you have a stuck sequencer ( Thermal time delay)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace won't blow hot air or shut off [ 3 Answers ]

I have a concord 80 plus furnace. Its less then 2 years old. It will not blow hot air, and the motor just runs and will not shut off no matter what the therm is set at. The LED flashes 4 times which says "open limit switch or limit switch circuit". I pulled the limit switch out (at least I think...

Intermittant furnace shut down [ 1 Answers ]

I have a 15 year old Bryant gas forced air furnace. The furnace has shut down intermitantly this season. It has an electronic ignition that locks out and the furnace shuts down. When I flip the power switch off and on the spark will start and the furnace will operate again for days. Any...

Furnace will not shut off [ 1 Answers ]

I have a 20+ year old Coleman furnace with AC. The White Rogers thermostat has four wires connected, RC, W, G, Y. There in no jumber from RC to RH. There is a blue wire embeded in the wall but is not connected on either end. The AC worked great in hot weather. The problem now is that when the...

Shut down [ 3 Answers ]

In my windows98 SE system, it is not showing "safe to shut down window" after I install some software or hardware to restart the computer or shut down the computer. It is struck at processing shut down. Please reply.


View more questions Search