Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Coleman gas furnace trouble
[ 6 Answers ]
Coleman gas funace, model #7680C856 for mobile home worked great last year but since cold season hit, can't keep home warm (especially at night where it has been as low as 50 degrees). Thought it might be the thermostat so replaced that with new one but same thing. Thermostat clicks, burners...
Wiring a furnace thermostat to manually operate the furnace fan
[ 2 Answers ]
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
My intertherm furnace pilot lights but furnace won't kick on
[ 5 Answers ]
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work
[ 1 Answers ]
I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can... View more questions Search
|