Ask Experts Questions for FREE Help !
Ask
    Iain1's Avatar
    Iain1 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 31, 2007, 12:25 PM
    Furnace slow speed fan
    For the EXPERTS

    I have a Goodman GMS8 furnace with air. The manual slow speed fan setting was never hooked up at the thermostat. I believe it is just a matter of jumpering the terminals to engage the slow speed fan. If this is correct what terminals (at the furnace) do I jumper on the circuit board. The board is the standard White Rogers circuit board.

    Thanks I
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    May 31, 2007, 03:03 PM
    Look for a diagram somewhere on the furnace or look in your owners manual.

    What is the white Rodgers board model number and I will see if I can look it up.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing furnace fan speed to change delta [ 7 Answers ]

I have a 12 year old Goodman furnace. About 3 years ago, I asked a service tech if there was anything that can be done to get warmer air out of the registers. He said he slowed the blower speed to get a higher temperature rise. I had the ductwork replaced and it is smaller than the original...

Furnace fan slow to turn on, off [ 3 Answers ]

We recently (as in last week) purchased a cabin equipped with a Day and Night forced air furnace. The fan for the furnace seems to take an awful long time to come on after the burner assembly ignites, and, similarly, the fan takes an awful long time to turn off after the furnace is turned off. ...

Writing speed too slow ! [ 10 Answers ]

Hi everyone ! My son is 11 years old. His writing speed is too slow. Normally , copying one passage takes him more than one hour. How to improve it ? Thanks for your helps .

Forced Air Furnace flame good, fan goes slow then fast then slow, etc [ 1 Answers ]

Hello, I have a forced air propane furnace in a "Park Model" rv trailer. (This is a bit smaller than a mobile home) The furnace is used infrequently as the trailer is located in a sumer resort vacation area, however we do like to go up a couple of times in the winter months. Furnace was...

3 speed ceiling fan only has 1 speed [ 3 Answers ]

I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...


View more questions Search