 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace Pressure switch Code
York Single stage This is the third winter its been running. The last two winters no problems. The control board fault code red light blinking three time which means pressure switch fault the unit will run up to a week with no problems and then it will shutdown with just the blower running I checked all the tubing on the pressure switch no water the condensate drain is draining Any help Thanks
|
||||
Check out some similar questions!
I get three red flashes from the furnace after an attempt sequence when the t-stat calls for heat. The motor starts, and seems to try to light but after about thirty seconds, it quits and gives the error code. I have removed both gray tubes from the pressure switch and made sure they are...
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals
I have a ducane furnace and the pressure switch is open when it should be closed. How do I correct this problem?
How do I close the pressure switch on a ducane furnace?
I have a goodman furnace with an open limit switch code /blinking lite. Blower runs,but no flame what can I do to fix this problem?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
