 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace not firing up and shows no flashing light?
Hello
My furnace has been acting up lately. The thermostat will call for heat and I hear the furnace trying to start up but is not blowing any hot air. After 15-20 secs it shuts down, waits for about 2 minutes and does the same thing. Then I switch it off and wait for 30 minutes or so. When I turn it back on it starts working fine. I works well for 2-3 days and does the same thing again. And when I open the cover to see for error codes, the small hole, through which I would normally see a green or amber light flashing, has no flashing or solid light at all. How do I fix this? |
||||
Check out some similar questions!
Bryant gas furnace 14 yrs old flashing 31 on diagnostic led
My flame went out on my furnace and I saw a green flashing light , with a red button below it. I hit the red button and the green light went away, so I hit the red button again and furnace fan kicked on and then burner light. It through a cycle heating the house to proper temp. and when the furnace...
I have a Ruud Silhouette II Gas Furnace. The whole unit is turned off/on by a light like switch. The AC is working, but the heater is not. It appears that no gas is flowing to the burner. The PWR light is on, steady. The OK light is flashing; three times on, then off. The Flame light is off in...
My gibson furnace is not heating, when I looked inside, I saw a flashing red light and no flames. What could be the problem?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
