Ask Experts Questions for FREE Help !
Ask
    kenber's Avatar
    kenber Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2012, 02:47 PM
    My furnace fan goes on but the gas does not
    My intercity furnace has the General 90 50A 50 110. It seems to operate correctly. I measure 24volts AC at the transformer input to the board. The red light only flashes on when power is connected. The furnace gas does not light. Is there a relay to turn on the spark?
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
    		  
    #2

    Mar 23, 2012, 06:53 AM
    Reply via email:

    I found the answer. The ignitor for the gas was burned out and had to be replaced.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts [ 2 Answers ]

Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...

XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts [ 0 Answers ]

Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...

Gas furnace gas shuts off when fan comes on [ 2 Answers ]

I have a Frigidaire\Nordyne G6RA 096C-16 gas furnace. The electronic ignitor lights the gas. However, when the blower comes on, the gas shuts off. This happens repeatedly. I turned off the furnace, waited a few seconds, and turned it back on. It worked fine for the first thermostat cycle...

Gas Furnace Fan [ 3 Answers ]

Replaced fan on G20re furnace late summer.Thermostat was clicking on and off, replaced thermostat, now fan is only kicking on intermittently. Have hit the unit couple if times and it will kick on. Loose wire?

Fan on natural gas furnace [ 1 Answers ]

The fan on my natural gas furnace does not work when thermostat is on the "on" position. Fan works when on "auto" and the furnace kicks on. What is the problem?

View more questions Search