Ask Experts Questions for FREE Help !
Ask
    nails720's Avatar
    nails720 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jul 1, 2009, 07:51 PM
    Furnace Blower malfunction
    The circuit breaker and furnace switch are on. The furnace appears to come on, I hear noise but the blower does not come on.
    nails720's Avatar
    nails720 Posts: 4, Reputation: 1
    New Member
     
    #2

    Jul 1, 2009, 08:05 PM
    The circuit breaker and furnace switch are on. The furnace appears to come on, I hear a noise but the blower does not come on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower fan malfunction [ 3 Answers ]

If the blower fan does not work in the "fan only" mode (or any mode), does it necessarily have to be replaced or could something else be wrong?

What causes a Comfortmaker blower malfunction? [ 1 Answers ]

Comfortmaker furnace problem. Model# NTVM125KNB2 Initially, the blower would run constantly whether in cool,heat or off mode, Auto fan or manual-blower ran 24/7. I changed the batteries in the tstat, powered the unit down at the breaker, cleaned the filter, reassembled the stat, turned on the...

Furnace blower control malfunction [ 4 Answers ]

My 15 yr old Bryant 394GAD gas furnace started this fall by doing everything OK except that when the burner clicked off, the blower would cycle off and on 2-4 times before shutting off completely. Now the problem has progressed to where the blower won't shut off at all after the burner is shut down...

Furnace malfunction [ 8 Answers ]

I have an old (14 years ?) York Stellar furnace that used to have this problem sometimes. When the gas was released over the red glowing electric igniter, it would ignite with a more or less loud pop that would also kill the flames. Then it would go again through the whole sequence and everything...

Furnace malfunction [ 2 Answers ]

Why would my furnace kick off and say limited cycle on the code ?on a coleman evcon


View more questions Search