 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Funace won't reach desired temp. then won't restart
I have a Bryant plus 90 furnace. Approx 8 years old. It will run for about 5 minutes then stop before reaching desired temp. Then it will try to start up again but shut down before ignition. Flipping power on and off will make it work again. I cleaned the flame sensor with no change. It appeard to be clean.
|
||||
Check out some similar questions!
My beckett 55,000 btuh model afg runs but shuts down before desired heated temp.the computer panel was changed for 160.00.that did not fix the problem.it struggles to get warm in house
Hello - Last Thursday I had a brand new Amana furnace (GMV95070) and Central AC (GSX13030) installed in my home. The unit replaced was all Lenox and approximatley 20 years of age. The problem is with the new AC unit... The old supposidly inefficent AC unit had absolutley no issue getting my...
I recently changed out my old mercury thermostat to a Honeywell RTH3100C digital non-programmable thermostat. The issue I'm having is that once the desired temperature is reached on the thermostat the a/c won't shut off. What could be the issue?:(
My AC units will shut off before the temp reaches the set temp. I thought is was my thermostat so I replaced it. No change. Example. Temp is reading 80. I set temp for 76. The AC goes on. The thermostat (LuxPro) has a blinking indicater when the unit is blowing. The AC stays on for a few...
GMP100-3 gas furnace: The furnace runs for 3-5 minutes then shuts itself off for 2-3 minutes then repeats the start- stop cycle. I turned the thermostat up but it still acts the same. Any tips would be appreciate
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
