Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Venting fuel oil furnace
[ 1 Answers ]
I have a high efficiency fuel oil furnace. I have been having problems with condensation in the chimney which is causing water to leak through my ceiling around the chimney. I tried pitting a metal flue liner in but it would not fit because the chimney narrows at one point to the size of a...
15.5 Briggs and Straton on a craftsman rider fuel in oil
[ 1 Answers ]
I just repaired the above lawnmower. I cleaned all the needle valves and finally got it running. Now it is running for about five minuites then blowing white smoke everywhere and dying. The engine is also blowing a combination of oil and gas out of the rubber tube on the air intake at the time...
B&S 18.5HP Intek, oil/gas coming from fuel pump
[ 5 Answers ]
Gas comes out of the screen on my fuel pump and the engine smokes like it's on FIRE when its under a heavy load. I replaced the fuel pump but this did not help. Someone suggested the crankcase vent might be stopped up, but I can't find a vent anywhere. The engine starts fine and idles without...
Yellow Tygon Oil and Fuel Tubing
[ 1 Answers ]
I recommend use of yellow Tygon Oil and Fuel line, instead of vinyl tubing, on your 2-cycle applications. It's a superior product and will stay flexible for years. You can obtain it from the following very nice people: http://www.pspmfg.com/FuelLine.html You will be glad you tried it and you will... View more questions Search
|