 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fireplace blower control switch
Hello,
I have a fireplace blower control switch that needs to be installed but am very confused. The switch has 1 black wire and 1 white wire. Coming out of the wall are a set of Black wires with a wire but, a set of white wires with wire nut, 1 red wire, and a ground. Seems like a lot going on for just a control switch. What wires are to be together? I know the basics, black with black, white with white but, please help! Thanks! |
||||
Check out some similar questions!
Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...
I have an old (~15 yrs I guess) fireplace blower system made by Diamond W Products. The blower motor burned out and I'm trying to find an equivalent replacement. Talked to Diamond W and they discontinued this product line 6 yrs ago (yes, due to problems with the motor). The motor is rated as: ...
I have a majestic gas fireplace and just installed a blower made for it. Everything went together great but the temp sensor location must be wrong because the fan will not turn on automatically (not enough heat at the sensor). I don't see any cut outs for it either. Is there a special spot for the...
I have one of those fireplaces that turns on with the flip of a switch. I turned it on yesterday to see if it worked (just moved into the house) and now I can't get the blower to turn off. I have turned off the gas with the gas key, but the blower is still on. Anyone know how to turn the darn...
How do I troubleshoot a new Kozy Heat gas fireplace blower that is not working?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
