Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Oil boiler switch to gas boiler
[ 0 Answers ]
I have a 1940's oil furnace with original radiator (built in fin tube with steel, radiator size covers) I want to switch to high efficiency natural gas. Are there any "Don'ts" that I should be aware of? I want to get a combination system and replace my electric water heater also. Is an instant hot...
Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s
[ 2 Answers ]
Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.
Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump
[ 0 Answers ]
I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.
Is it common that gas valves can be faulty or does something on the boiler blowing it
[ 1 Answers ]
Is common for gas valves to be faulty or can something on the boiler blow the valve I have just replacedone on a ideal boiler after the previous one failed after 5 days this new valve also failed is this just bad luck or something serious leading to the valve to fail
Connecting a wood boiler to exsisting boiler
[ 2 Answers ]
I need a plumbing diagram to connect a wood burning boiler to an exsisting primary boiler, exsisting boiler is apeerless 105/85 that is approx. 20 years old View more questions Search
|