Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Janitrol Heater will not come on in Auto Mode, But comes on in Manual ON
[ 5 Answers ]
I have a Janitrol Heater/AC Model GU075-3 Serial Number 870707668 When I switch the Thermostat to Auto and Heat mode the Flame in the heater ignites and about 30 to 45 sec later goes out, The blower fan never comes on. However if I switch the Thermostat from Fan Auto to Fan on The Heater Flame...
Furnace fan goes on when in manual mode but won't work on auto
[ 1 Answers ]
This is a 15 old unit I checked it yesterday and everything seems to work all right on manual mode but when turned on auto it fallows all steps but when it sends signal for fan to go on it does not work
Fan runs forever when in heat mode but not in ac mode
[ 2 Answers ]
Great web site and concept!! I have a York forced air gas furnace that has a Honeywell Fan Limit switch. The unit works great in the summer. The ac and the fan shut off correctly. However, in the winter the heat will reach its temp setting and turn off but the blower continues forever. I have...
Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode
[ 6 Answers ]
The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...
Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode
[ 2 Answers ]
The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the... View more questions Search
|