 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan blowing but not igniting
The fan out our furnace is blowing but the inducer motor is not turning and the gas is not coming on. This is on a carrier/bryant 395 B furnace. I replaced the board HH84AA009 and the transformer, but the same condition continues. A couple of years ago I replaced the inducer printed circuit board when the inducer motor would intermittently operate.
|
||||
Check out some similar questions!
"After vaccum my furnace(Heat only, Day and Night furnace with model #396GAW00100-ACAA), the fan stop blow but burner will be on when I adjust the temperature below the setpoint on thermostat. My fan had problem last year. It will not stop even after burner off for long time. I had to tap side of...
OK while changing my thermostat from manual to digital I had to change the circuit board in the attic furnace it looks the same but a slight difference it a goodman 5 ton 13 seer... any way. When I change the thermostat my heating work great fan blow when it on. Now its the summer I switch it to...
I set thermostate for heat also set to automatic. No heat is coming out of vents so I went downstairs to investagate further. I took panel off heating system where there are 4 blowers that would normally be ignited. All I can tell is that the unit is operating cause there is sound and blowing...
Air conditioning feels cool near vents, but doesn't seem to be blowing -the air handler sounds like it is running - any suggestions on what problem may be?
Have a 6 yr old comfortmaker NDN3/NDF furnace and fan seems to be blowing all the time. Everything seems to be clear and everything but it does not seem to be igniting even if I crank the heat level up on the thermostat. Have a honeywell thermostat and I changed the batteries just in case it was...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
