Ask Experts Questions for FREE Help !
Ask
    outerpatrol's Avatar
    outerpatrol Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2014, 01:30 PM
    Error code 6 flashes Goodman furnace
    Error code 6 flashes. Have checked ground, good. Intake and exhaust pipes are good. It will light and run for 5 min. or so then the burner kicks off and blower motor clears out heat. It then starts flashing 6 code. Intake fan ist still running will run for 2 min. then shuts down till power is turned off and back on. Any help appreciated. Thanks Al
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 22, 2014, 02:14 PM
    Open the front of the unit. Error codes are posted there. Then you can trouble shoot.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Goodman GCVC9 gas furnace that has an error code of 53? [ 1 Answers ]

Does anyone know what an error code of 53 means on a Goodman two stage gas furnace model GCVC9 could mean?

Error code 2 red flashes for rheem furnace [ 1 Answers ]

Igniter does not spark, induction motor runs, no burner flame. 2 red flashes on board - Rheem RKKA

Goodman furnace error code 1, [ 0 Answers ]

Replaced flame sensor , it work 1 day and now I have the same problem error code 1.

On my Goodman GMP050 furnace, how do I read and interpret an error code? [ 1 Answers ]

On my Goodman GMP050 furnace, how do I read and interpret an error code?

Trane Furnace error code = 2 flashes, what does system lockout mean? [ 1 Answers ]

I have a Trane forced air furnace which recently has had periods when it blows unheated air. When I looked at the furnace during these periods it shows 2 flashes, which according to the instruction manual is an error code which means: System lockout, retries or recycles exceeded. I don't...

View more questions Search