Ask Experts Questions for FREE Help !
Ask
    sanborna's Avatar
    sanborna Posts: 4, Reputation: 1
    New Member
     
    #1

    Oct 19, 2006, 09:08 AM
    Electric Baseboard Heat ?'s
    Hi All,

    I have electric baseboard heat in our home, and each room is controlled separately. And this may sound dumb... do I need to have the heat set at a certain minimum temperature for the winter? (we live in MN)

    Also, is it more cost efficient for me keep them in each room on at a lower temperature continuously or shut them completely off each morning as I leave the house? Is it OK if were not using a room to keep it completely off? If anyone has any advice or websites to get more information on this, that would be great!

    Thanks
    rickdb1's Avatar
    rickdb1 Posts: 185, Reputation: 15
    Junior Member
     
    #2

    Oct 19, 2006, 09:42 AM
    Quote Originally Posted by sanborna
    Hi All,

    I have electric baseboard heat in our home, and each room is controlled separately. And this may sound dumb..... do i need to have the heat set at a certain minimum temperature for the winter? (we live in MN)

    Also, is it more cost efficient for me keep them in each room on at a lower temperature continuously or shut them completely off each morning as I leave the house? Is it ok if were not using a room to keep it completely off? If anyone has any advice or websites to get more information on this, that would be great!

    Thanks
    No certain minimum temp. to have it set on. Your thermostat probably only goes down to about 50* anyway(Might be a bit chilly at that temp). Of course, if you want to prevent pipes and such from freezing while you are gone from the residence for extended periods, then make sure to leave the heat on. I would not shut any room completely off unless it is not going to be used at all. You would then have to heat everything in that room up again when you come home and that costs more than just lowering the thermostat 5 or 10 degrees when you leave.
    sanborna's Avatar
    sanborna Posts: 4, Reputation: 1
    New Member
     
    #3

    Oct 19, 2006, 10:20 AM
    Great! Thanks for responding! : )
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #4

    Oct 19, 2006, 02:41 PM
    I would just like to add, interior walls are not insulated. Other rooms you are trying to heat are just supplementing the rooms you have set all the way down. The greater the disparity in temp from one room to the next the faster the heat will travel to cold.
    rickdb1's Avatar
    rickdb1 Posts: 185, Reputation: 15
    Junior Member
     
    #5

    Oct 19, 2006, 02:46 PM
    Somewhat true, but you would have to weigh that against the cost savings of shutting down that rooms heater. One less zone to have to satisfy and even if the room is only say, 10' X 10', 100 Sq. Ft. less to heat is nothing to sneeze at...
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #6

    Oct 19, 2006, 02:56 PM
    It is very hard to predict how much harder the zones (around the turned down room) have to work because the heat is radiating so fast to that area. Non insulated walls you know.
    rickdb1's Avatar
    rickdb1 Posts: 185, Reputation: 15
    Junior Member
     
    #7

    Oct 19, 2006, 03:09 PM
    Only your utility bill will tell...
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #8

    Oct 19, 2006, 03:20 PM
    Turn the thing clear off. It is on the outside wall, and the colder it is, the less heat you will lose out the outside wall. If you don't have enough heat flow in from the other rooms to keep it at least 50 on the outside wall, then turn it on low. That will keep the plaster in good shape and give you a good margin for any water pipes.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing from gas heat to electric heat [ 3 Answers ]

How do you change from Apollo gas heating system to electric heating system?

Electric baseboard help [ 1 Answers ]

We have just tried to turn on our electric baseboard heat for the season and only one room comes on. There is a thermostat in every room and I can hear them click but no heat is generating. What can be wrong?? We have checked the breakers and they are on and have juice. Please someone HELP me! I...

Baseboard electric heat [ 1 Answers ]

Does anyone have any recommendations for brands/style of baseboard heaters? Have looked at hydrosil, they claim to be efficient but are higher priced units. Are the fluid/gel filled units that much more efficient than the cheaper units? Thanks

Baseboard heat question [ 12 Answers ]

I've roughed in wiring to install 2 baseboard heaters in a room in my basement.I want to make sure that I got it right.I ran 12/2 wire from the panel to the wall thermostat box,then a separate 12/2 line out to each heater location.I want to use one 1000w heater and one 1500w heater and put them on...

Thermostats for baseboard heat [ 4 Answers ]

We built our house 30 years ago using electric baseboard heat. This is 240 volt electric heat. We would like to change the original thermostats (Mears M7) to progammable digital themostats. Those that we have looked at indicate two models; single pole and double pole. How would I determine which...


View more questions Search