Ask Experts Questions for FREE Help !
Ask
    Booner87's Avatar
    Booner87 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 12, 2010, 10:33 PM
    Digital display on thermostat
    The digital display on our thermostat is not working. I seem to be able to turn the fan on, but not the air conditioning! Any ideas for troubleshooting?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #2

    Jul 13, 2010, 05:33 AM

    Change battries, if this does not work. Turn power off at furnace. If neither works. Time for a new stat

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Top Load Washer has PF in digital display [ 1 Answers ]

My Kenmore Elite Top Load Washer has PF in the digital display. It continues to display this even after I pull the power cord and plug it back it. I can't clear it with the cancel button. It will not start a cycle. I don't have the book for the machine anymore. I don't know what to do to fix...

Digital Thermostat Conversion, no display [ 7 Answers ]

I have a 20 year old honeywell dial thermostat with 4 wires, Red Green White and Yellow connected. I purchased a Honeywell T8001F programmable and connected the RED wire to the R connection, White to W, Yellow to Y and Green to G. There are other wire terminals like B and O . Once...

GE Elec Range Digital Display Touch Pad not working [ 2 Answers ]

My 10-year old GE Range display stopped working. The digital display shows 888 88:88 in the space where I normally would touch to set and turn on the oven, timer, and clock. So far I have tried pushing different places on the touch pad and have tried turning the breaker switch off and on. Nothing...

Noma Digital Thermostat - Display issue [ 3 Answers ]

Hi, I was doing the simple task of changing the batteries on my Noma digital thermostat. When I put the new batteries in the display went blank and I can't for the life of me get it to come back. Any suggestions? Scott

Dishwasher digital display cycle [ 2 Answers ]

Have a sears Kenmore Ultra II under counter dishwasher. Seems to work fine, however, when it is finished the washing cycle, and is drying, the digital readout shows "LO". Do not have the manual. What does this mean? It seems to be hot when the door is opened, steam comes out and the dishes are...


View more questions Search