Ask Experts Questions for FREE Help !
Ask
    flyfish5555's Avatar
    flyfish5555 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 31, 2011, 08:44 PM
    Did not flush out r-22 line set for 4-10-a?
    Did not flush out a new system in a old house from r-22 to 4-10-a (stupid) just forgot, 1st one I did as a retro fit anyway, its freezing up at a-coil any suggestions best way to repair this mess up I caused. NEED YOUR HELP PLEASE.

Check out some similar questions!

We live on an older farm , the toilets rarely flush efficiently 2nd flush is required [ 2 Answers ]

I liv

When changing an r22 system to a r410 do I need to change the line set [ 2 Answers ]

I'm replaceing the condenser and coil on a house with a R410 system do I have to pull new line sets

How do I flush the main water line? [ 13 Answers ]

I have NO water pressure in the whole building. How do I flush the lines myself?

First Flush of Toilet does NOT work right BUT second flush works great? [ 4 Answers ]

We have 2 toilets and both have the same problem. The first flush does NOT work right and will NOT flush completely, water rises and then goes back down. The second flash works GREAT? We have plunged and clean out all blow or jet holes NOthiNG is plugged? Short of double water bills and the...

Can't get syphon flush to work. Very weak flush resulting [ 1 Answers ]

I have replaced a syphon type flush mechanism in a toilet cistern. I fillet up the cistern with water and tried to flush the toilet. I get a very weak flush with a lot of gurgling noises. I can't seem to get a proper syphon effect. Any suggestions as to how I might to get a proper flush? Ball valve...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.