Ask Experts Questions for FREE Help !
Ask
    berihash1's Avatar
    berihash1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2008, 01:25 PM
    Diagnostic Light flashes twice on Nordyne Furnace
    I am actually writing for my sister with no internet. I do not have the model of the furnace. They came to their cabin today to find it frozen. The diagnostic light on the Nordyne Intertherm Furnace will flash twice when the furnace is turned on. The furnace will run for a few seconds and the shut off again. Could not find a manual anywhere with diagnostics in it on the internet either. Any help would be appreciated. Thank you.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 1, 2008, 02:40 PM
    It could be

    Pressure Switch Stuck Open = 2 Flashes
    kahne's Avatar
    kahne Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 2, 2008, 08:17 AM
    How do you close pressure switch on nordyne furnace?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Mar 2, 2008, 08:59 AM
    Remove tube and drain water if any is present. Blow in the tube to activate the pressure switch. If that does not work replace the pressure switch.

    BTW turn off the power before you do this.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nordyne Furnace. Red Status Light. [ 3 Answers ]

Keeps double blinking. I found the error in tha manual and it states "Pressure Switch Open with Inducer On". I think I found the Pressure switch but I don't see any knob, buttons or anything to adjust. So what's the fix? It's getting a little chilly in here. :rolleyes:

Diagnostic Light is off and Blower does not come on [ 23 Answers ]

I have a Bryant 373LAV/376CAV (not sure exactly which one) mounted horizontally in the attic that is <5 years old and has been functioning perfectly since installed. However, because Houston doesn't get very cold winters and this furnace serves the second floor, which we rarely use, I am not sure...

Furnace diagnostic code [ 1 Answers ]

Concord furnace diagnostics : 3 flashes : Pressure switch is open while inducer is on.

Hampton Bay Fan/Light: Light flashes intermittently [ 1 Answers ]

Installed fan 3-4 months ago and have had no trouble until past week when light on fan started flashing intermittently. Fan has remote and is wired directly to power source -- no switch. Checked all connections, but cannot figure out why light is flashing. Any help is much appreciated!

View more questions Search