Ask Experts Questions for FREE Help !
Ask
    bargd's Avatar
    bargd Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 28, 2009, 09:03 PM
    Day & night blower noisy rattles fix or replace?
    :) Hello
    My nat. gas furnace may be from 1964 and the blower motor is loud and rattling when fan is on. How much more fuel efficient are new models that salesmen think I should buy? What makes new units energy savers? Can I make my old furnace waste less energy by somehow sealing the ducting and plenum under the house

    I need to save money so I was going to try to replace the blower motor myself if is not too complicated. Where can I find instructions about replacing the motor? How can I find the right motor for my unit?

    Here are some specs. I found on the furnace. Model 80CD 1064-96413 Series:150 80,000 115 Volts, 60 cycle, Bonnet cap 64,000, Less than 12 amps. I have no operating manual as the last owner of the home had none to pass on in 1980.

    Thanks in advance,

    Barbara G
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Aug 29, 2009, 12:19 AM
    I have no information on that model number but if it is a 1964 or there about model a new furnace should be in your future. The new units can be around 95% efficient. Your old one from that era is about 65% so it would be a smart move for you to get a new furnace. If you keep the old furnace and repair it you need to have a professional come in and check the heat exchanger since many units that old might have cracks which can cause CO poisoning.

    To find a new motor remove it and take it to a local electric motor shop in your area and have them match it up. Removal and replacement is standard mechanical stuff and the wiring for the new motor will be listed right on the motor body or on a paper diagram in the box.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #3

    Aug 29, 2009, 10:21 AM
    Now this is just me, my thoughts on the matter

    I for one would not lie down to sleep in a house with a 45 year old gas furnace in opporation,, not even if I knew my life insurance was paid up in full and it promised me I would not die in my sleep

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace blower noisy [ 1 Answers ]

Help, the fan blower on my furnace is noisy. I turned it off and manually spun the fan... it moved smoothly. Any suggestions?

Furnace Blower Noisy [ 3 Answers ]

I just bought a house with a probably 50+ year old furnace. It is made by International Heater Company, Utica N.Y. It is 80,000 BTU and the house is 900 square feet. It works perfectly except when the blower comes on it is so noisy. Any remedy to cut out the noise. The repairman said old furnace...

Noisy Blower Motor [ 4 Answers ]

I had the 1 hp blower motor on my furnace/air conditioner replaced in December 2005. In the last 2 days, it has gotten extremely loud. It still works, but it sounds like there's an airplane in my basement. Any ideas about what could be going wrong? Is it something that can be fixed or will I...

Noisy blower [ 2 Answers ]

I have a gas furnace (Day and Night brand) that is about 25 years old. It heats fine but has an extremely noisy blower motor. It is a loud combination of thump, thump,thump with a lot of sheet metal noise. The blower is direct drive (no belt) and I cannot see without doing a complete...

Noisy blower startup [ 8 Answers ]

In mid-summer I had the blower motor and capacitor replaced in my Comfortmaker RPG II 150,000 BTU natural gas furnace. (The bearing was going out in the motor). This is a direct-drive squirrel cage blower. Since being replaced, it makes a loud 60hz hum startup noise. It varies in pitch as the...


View more questions Search